抛光树脂-杜笙MB-115(出水17兆左右）
抛光树脂一般用于超纯水处理系统末端，来保证系统出水水质能够维持用水标准。一般出水水质都能达到17兆欧以上，以及对TOC、SIO2都有一定的控制能力。抛光树脂出厂的离子型态都是H、OH型，装填后即可使用无需再生。一般用于半导体行业。抛光树脂（超纯水专用混合离子交换树脂）是已再生预混好的、可直接使用的超纯水专用混床树脂，使水处理系统中不需要设置酸、碱再生和树脂分层系统；MB-115主要用于电子产品生产、半导体材料制备等行业的超纯水生产，特别适合使用在EDI、CDI连续除盐系统装置后用做抛光混床，也可用于各种水处理工艺后进行的精处理，含放射性物质的水处理系统直接使用。
MB-115抛光树脂（超纯水专用混合离子交换树脂）具有极高的交换容量和 的抗渗透强度、制水量大、出水水质稳定，溶出物极低，使用方便等特点。出水水质＞17MΩ/cm;
TULSION® MB-115
MIXED BED ION EXCHANGE RESIN FOR ULTRA PURE APPLICATION
TULSION® MB-115 is a mixture of strong acid cation exchange resin TULSION® T-46 (H) and
strong base anion exchange resin TULSION® A-33(OH) in 1:1.5 volumetric ratio. TULSION® MB-
115 P is a specially designed as a polisher to obtain low conductivity water
TULSION® MB-115 is the ideal choice for electronic intries, which manufacture semi conductors
and television tubes etc. where ultra pure water is required.
TULSION®T-46 TULSION®A-33
Type Strong acid cation exchange
resin
Strong base anion exchange resin
Matrix Structure Cross linked polystyrene Cross linked polystyrene
Functional Group Sulfonic acid Quaternary ammonium Type I
Physical Form Moist spherical beads Moist spherical beads
Ionic form supplied Hydrogen Hydroxide
Screen Size
U.S.mesh(wet)
16 to 50 16 to 50
Particle Size 0.3 to 1.2 mm 0.3 to 1.2 mm
Fines Content Less than 0.3 2% passing
through 40 U.S.mesh
Less than 0.3 2% passing through 40
U.S.mesh
Total exchange capacity 1.8 meq/ml minimum of
99% in hydrogen form
1.0 meq/ml minimum of 90% in OH
form and less than 1% in Cl form
pH range 0 to 14 0 to 14
Temperature stability 120°C 80°C
Solubility Insoluble in all mon
solvents
Insoluble in all mon solvents
anic leachables Less than 0.2 mg KMNO4 per
ml of wet resin
Less than 0.2 mg KMNO4 per ml of wet
resin
Backwash settled density Approx.750 gm/liter
Impurities Fe=50 ppm(max) Fe=50 ppm(max)
Cu=50 ppm(max) Cu=50 ppm(max)
Pb=50 ppm(max) Pb=50 ppm(max)
Bead strength Avg. not less than 500g/bead
by Chatillon test
Avg. not less than 300g/bead by
Chatillon test
For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available at our offices. The data included herein are based on test information obtained by Thermax Limited. These date are believed to be reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are per BIS/ASTM. We rmend that the er should determine the performance of the product by testing on his own processing equipment.
For further information, please contact:17090831380，,13917047856，QQ315684815.
